用戶登錄
業務領域
增值服務
合作機構
聯系我們
地址：中國江蘇省南京市江東中路118號德盈大廈16F
電話：(+86) 025-8658 3475
傳真：(+86) 025-8658 3475
郵箱：info@hksmartps.com
網址：www.shseg-gps.com
電話：(+86) 025-8658 3475
傳真：(+86) 025-8658 3475
郵箱：info@hksmartps.com
網址：www.shseg-gps.com
制造商在產品上加貼CE標志的步驟指南
發布日期：2023-9-13 13:53:42 閱讀次數：1808
制造商對確保歐洲經濟區市場銷售的產品的安全性發揮著至關重要的作用。制造商負責檢驗其產品是否符合歐盟安全、健康及環保要求。制造商的職責包括：實施合格評定、建立技術檔案、出具歐盟合格聲明及為產品上加貼“CE”標志。只有在完成上述步驟之后，產品方可在歐洲經濟區市場中進行銷售。
制造商為產品加貼“CE”標志需要遵循以下六個步驟：
1.確定適用的指令法規和協調標準；
2.核實產品的特殊要求；
3.確定是否需要（通過通告機構）進行獨立的合格評定；
4.測試產品并檢查合規性；
5.起草并保留必要的技術文件資料；
6.加貼“CE”標志，并擬定歐盟合格聲明
因產品的不同，以上合格評定程序的六個步驟可能也不盡相同。產品不在指令法規的加貼范圍內的，制造商不得對其加貼“CE”標志。
詳見:http://ec.europa.eu/growth/single-market/ce-marking/manufacturers/index_en.htm
Manufacturers
Manufacturers play a crucial role in ensuring that products placed on the extended single market of the European Economic Area (EEA) are safe. They are responsible for checking that their products meet EU safety, health, and environmental protection requirements. It is the manufacturer’s responsibility to carry out the conformity assessment, set up the technical file, issue the EU declaration of conformity, and affix the CE marking to a product. Only then can this product be traded on the EEA market.
If you are a manufacturer, you have to follow these 6 steps to affix a CE marking to your product
1. Identify the applicable directive(s) and harmonised standards EN
2. Verify product specific requirements
3. Identify whether an independent conformity assessment EN (by a notified body) is necessary
4. Test the product and check its conformity
5. Draw up and keep available the required technical documentation
6. Affix the CE marking EN and draw up the EU Declaration of Conformity
These 6 steps may differ by product as the conformity assessment procedure varies. Manufacturers must not affix CE marking to products that don’t fall under the scope of one of the directives providing for its affixing.
For products that present higher safety risks such as construction products, safety cannot be checked by the manufacturer alone. In these cases, an independent organisation, specifically a notified body appointed by national authorities, has to perform the safety check. The manufacturer may affix the CE marking to the product only once this has been done.
相關參考：
歐盟公告NB機構&TAB機構-TZUS(NB1020)歐盟強制CE認證及ETA認證 https://www.fire-test.com/newsinfo/5947886.html
歐盟公告NB機構&TAB機構-TSUS(NB1301)歐盟強制CE認證及ETA認證 https://www.fire-test.com/newsinfo/5947954.html
南京睿督2023年最新解讀：歐盟ETA認證與CPR法規及CE認證的關系 http://www.cprce.com/Certification/eta/918.html
南京睿督公司為歐盟公告號Notified Body實驗室授權合作機構，可以直接受理各類建筑產品CE認證及ETA認證
南京睿督全國免費咨詢電話：400-603-6575 025-8658 3475
網址：www.shseg-gps.com www.cprce.com
郵箱：info@hksmartps.com
微信：firetesting 或 17714189018
…
制造商為產品加貼“CE”標志需要遵循以下六個步驟：
1.確定適用的指令法規和協調標準；
2.核實產品的特殊要求；
3.確定是否需要（通過通告機構）進行獨立的合格評定；
4.測試產品并檢查合規性；
5.起草并保留必要的技術文件資料；
6.加貼“CE”標志，并擬定歐盟合格聲明
因產品的不同，以上合格評定程序的六個步驟可能也不盡相同。產品不在指令法規的加貼范圍內的，制造商不得對其加貼“CE”標志。
對于有較高安全風險的產品，如建筑產品等，不能僅由制造商進行安全檢查。在這種情況下，產品應由國家主管部門指定的獨立機構，即專門的通告機構進行安全檢查。檢查合格后，制造商方可對其產品加貼“CE”標志。
詳見:http://ec.europa.eu/growth/single-market/ce-marking/manufacturers/index_en.htm
Manufacturers
Manufacturers play a crucial role in ensuring that products placed on the extended single market of the European Economic Area (EEA) are safe. They are responsible for checking that their products meet EU safety, health, and environmental protection requirements. It is the manufacturer’s responsibility to carry out the conformity assessment, set up the technical file, issue the EU declaration of conformity, and affix the CE marking to a product. Only then can this product be traded on the EEA market.
If you are a manufacturer, you have to follow these 6 steps to affix a CE marking to your product
1. Identify the applicable directive(s) and harmonised standards EN
2. Verify product specific requirements
3. Identify whether an independent conformity assessment EN (by a notified body) is necessary
4. Test the product and check its conformity
5. Draw up and keep available the required technical documentation
6. Affix the CE marking EN and draw up the EU Declaration of Conformity
These 6 steps may differ by product as the conformity assessment procedure varies. Manufacturers must not affix CE marking to products that don’t fall under the scope of one of the directives providing for its affixing.
For products that present higher safety risks such as construction products, safety cannot be checked by the manufacturer alone. In these cases, an independent organisation, specifically a notified body appointed by national authorities, has to perform the safety check. The manufacturer may affix the CE marking to the product only once this has been done.
相關參考：
歐盟公告NB機構&TAB機構-TZUS(NB1020)歐盟強制CE認證及ETA認證 https://www.fire-test.com/newsinfo/5947886.html
歐盟公告NB機構&TAB機構-TSUS(NB1301)歐盟強制CE認證及ETA認證 https://www.fire-test.com/newsinfo/5947954.html
南京睿督2023年最新解讀：歐盟ETA認證與CPR法規及CE認證的關系 http://www.cprce.com/Certification/eta/918.html
南京睿督公司為歐盟公告號Notified Body實驗室授權合作機構，可以直接受理各類建筑產品CE認證及ETA認證
南京睿督全國免費咨詢電話：400-603-6575 025-8658 3475
網址：www.shseg-gps.com www.cprce.com
郵箱：info@hksmartps.com
微信：firetesting 或 17714189018
…
蘇公網安備 32010502010105號