
電話:(+86) 025-8658 3475
傳真:(+86) 025-8658 3475
郵箱:info@hksmartps.com
網址:www.shseg-gps.com
電機排煙系統根據EN12101-3標準進行歐盟強制CE認證。EN12101-3:2002標準已經于01/04/2004開始協調,緩沖期1年,01/04/2005強制執行,目前更新為EN 12101-3:2015最新版本。EN12101-3電機排煙系統CE認證根據體系1進行認證(即歐盟公告號實驗室對電機排煙樣品進行抽樣測試,及工廠審核),我司南京睿督為歐盟公告號NB1301及NB1020實驗室授權合作機構,專業從事歐盟建筑產品CE認證十多年,擁有豐富的CE認證經驗。貴司電機排煙系統CE認證將由歐盟公告號實驗室NB1020測試并簽發CE認證證書,以確保權威性。咨詢電話:025-8658 3475。
電動排煙和排熱通風裝置CE認證 – EN 12101-3 – 需要符合的產品法規和協調標準
產品法規: 建筑產品法規CPR(Construction Product Regulation) 305/2011/EU
歐洲協調標準:
EN 12101-3: 煙和熱控制系統. 第3部分: 電動排煙和排熱通風裝置規范
EN 12101-3: Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators;
電動排煙和排熱通風裝置CE認證 – EN 12101-3 – 涉及的產品范圍:
EN12101-3本歐洲標準規定了擬用做建筑工程中動力煙熱控制通風系統一部分 動力煙熱控制通風機的產品特性。給出了試驗評估結果的特性和符合性標準的試驗評定發放。本歐洲標準適用于:a)排煙和熱控通風風機;b)用于煙霧和熱控制通風的脈沖/噴射風機。
Scope:This European Standard specifies the products characteristics of powered smoke and heat control ventilators (fans) intended to be used as part of a powered smoke and heat control ventilation system in construction works.
It provides test and assessment methods of the characteristics and the compliance criteria of the test assessment results.
This European Standard applies to the following:
a) fans for smoke and heat control ventilation;
b) impulse/jet fans for smoke and heat control ventilation.
電動排煙和排熱通風裝置CE認證-性能要求
CE marking to Smoke and heat control systems–EN 12101-3 - Requirement
Response delay:響應延遲
- Opening under wind load within a given time給定時間內在風荷載下打開
- Opening under snow load within a given time.給定時間內在雪荷載下打開
Operational reliability:運行可靠性
- Application categories應用類別
- Motor rating電機額定值
Effectiveness of smoke/hot gas extraction:煙/熱氣提取的有效性
- Gas flow and pressure maintenance during smoke and heat extraction test煙氣和熱提取試驗中的氣體流量和壓力維持
Resistance to fire防火性能
Ability to open under environmental conditions能夠在環境條件下開放
- Opening under wind load within a given time給定時間內在風荷載下打開
- Opening under snow load within a given time給定時間內在雪荷載下打開
Durability of operational reliability 耐用的操作可靠性
電動排煙和排熱通風裝置CE認證-認證流程:
1、確定需要認證的產品類型,提交申請
2、確定歐洲產品指令,煙和熱控制系統需符合新的歐盟建筑產品法規CPR 305/2011/EU
3、確定歐洲協調標準,煙和熱控制系統需符合協調標準EN 12101-3
4、根據CPR指令和協調標準EN 12101-3進行測試評估,歐盟公告認證機構根據認證體系3進行測試認證
5、獲得由歐盟公告機構頒發的測試報告和證書
6、發放產品性能聲明(Declaration of Performance)
7、在產品包裝上加貼帶公告機構編碼的CE標志
8、在歐洲市場自由銷售
相關內容參考:
建材CE檢測認證機構-南京睿督公司 http://www.shseg-gps.com/certification/3602.html
歐盟CE認證 http://www.shseg-gps.com/ce/
歐盟CPR法規 http://www.shseg-gps.com/ce/cpr/
南京睿督公司為歐盟公告號Notified Body實驗室授權合作實驗室,可以EN 13813:2002找平層材料和瀝青地面CE認證。
南京睿督公司咨詢電話:025-8658 3475 400-603-6575
網址:www.shseg-gps.com
郵箱:info@hksmartps.com
……