
電話:(+86) 025-8658 3475
傳真:(+86) 025-8658 3475
郵箱:info@hksmartps.com
網址:www.shseg-gps.com
自然排煙系統根據EN12101-2標準進行歐盟強制CE認證。EN12101-2:2003標準已經于01/04/2004開始協調,緩沖期2年多,01/09/2006強制執行。EN12101-2自然排煙系統CE認證根據體系1進行認證(即歐盟公告號實驗室對電機排煙樣品進行抽樣測試,及工廠審核),我司南京睿督為歐盟公告號NB1301及NB1020實驗室授權合作機構,專業從事歐盟建筑產品CE認證十多年,擁有豐富的CE認證經驗。貴司自然排煙系統CE認證將由歐盟公告號實驗室NB1020測試并簽發CE認證證書,以確保權威性。咨詢電話:025-8658 3475。
自然排煙和排熱通風機CE認證 – EN 12101-2需要符合的產品指令和協調標準
A.產品指令: 建筑產品法規CPR(Construction Product Regulation) 305/2011/EU
B.歐洲協調標準:
EN 12101-2:煙和熱控制系統 第2部分 煙和熱的自然排放通風機規范
EN 12101-2:Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators;
自然排煙和排熱通風機CE認證 – EN 12101-2涉及的產品范圍:
EN12101-2本歐洲標準適用于排煙和排熱系統(SHEVS)的一部分運行的自然排煙和排熱通風機(NSHEV)。本標準規定了擬安裝在建筑物煙霧和熱控制系統中的自然排煙和排熱通風機的要求并給出了試驗方法。
Scope:This European Standard applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (SHEVS), placed on the market. This standard specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings.
自然排煙和排熱通風機CE認證-EN 12101-2性能要求
CE marking to Smoke and heat control systems–EN 12101-2- Requirement
Initiation device啟動裝置
Opening mechanism開啟機制
Inputs and outputs輸入和輸出
Reliability可靠性
Opening under (snow, wind) load在(雪,風)荷載下打開
Low ambient temperature第環境溫度
Opening under heat 在高溫下打開
Aerodynamic free area氣動自由區
Resistance to heat 耐熱性
Mechanical stability 機械穩定性
Reaction to fire 防火性能
Performance under load 負載性能
Low ambient temperature 低環境溫度
Stability under wind load 風荷載下的穩定性
Resistance to wind induced vibration 抗風振性
Response delay (response time) 響應延遲(響應時間)
Operational reliability 運行可靠性
Performance parameters under fire conditions著火條件下的性能參數
自然排煙和排熱通風機CE認證-認證流程:
1、確定需要認證的產品類型,提交申請
2、確定歐洲產品指令,煙和熱控制系統需符合新的歐盟建筑產品法規CPR 305/2011/EU
3、確定歐洲協調標準,煙和熱控制系統需符合協調標準EN 12101-2
4、根據CPR指令和協調標準EN 12101-2進行測試評估,歐盟公告認證機構根據認證體系1進行測試認證
5、獲得由歐盟公告機構頒發的測試報告和證書
6、發放產品性能聲明(Declaration of Performance)
7、在產品包裝上加貼帶公告機構編碼的CE標志
8、在歐洲市場自由銷售
相關內容參考:
建材CE檢測認證機構-南京睿督公司 http://www.shseg-gps.com/certification/3602.html
歐盟CE認證 http://www.shseg-gps.com/ce/
歐盟CPR法規 http://www.shseg-gps.com/ce/cpr/
EN 12101-3電動排煙和排熱通風裝置CE認證 http://www.shseg-gps.com/certification/4750.html
南京睿督公司為歐盟公告號Notified Body實驗室授權合作實驗室,可以EN 13813:2002找平層材料和瀝青地面CE認證。
南京睿督公司咨詢電話:025-8658 3475 400-603-6575
網址:www.shseg-gps.com
郵箱:info@hksmartps.com
……